Connecting Car Cd/player to boat, leisure battery? - how to wire a cd player into a boat
Hello
I'm not good in the electricity and need some advice, I have a Pioneer DEH-1000E CD with speakers. I have all the cables and left the remote control and lighting board wireless. The problem now is that I nor a son together and connect the black wire (ground) to refuse the battery negative, and yellow (battery) to the positive terminal of the battery, the camera has to change in itself, I called some experts as well and told me to try the red (ACC / ignition) cable instead of the yellow cable, power cord! then try to say, yellow and red on the positive battery cable with the black still on the negative terminal of the battery, still no answer.
Is there something wrong with the drive or the battery, I gave birth to the meter to the charger and the power of and the plug fits into the back of the unit to power, power is still ahead.
Who knows what the problem is embarrassing.
I'm sure theres a logical explanation!
I hope that the human type Ca help!
Monday, January 4, 2010
How To Wire A Cd Player Into A Boat Connecting Car Cd/player To Boat, Leisure Battery?
1 comment:
Your CD will not run unless there is tension in the cables red and yellow, and end up in the dark. If your meter shows 12 volts in both son with a black as a basic reference, and the bridge is not yet complete, I am afraid you have a defective unit. However, if you a reading below 11 volts, then the problem can use the resistance in the wiring between the main unit and battery. The wiring of vessels is often below standard and is supported by the fact that they are tightened a metal frame (like a return to the earth like a car) and cable connections, in fact vessels prone to corrosion.
Should If you have low blood pressure, then check to see running a new power, and the son of the soil from the platform directly to the battery. Use at least 14 class son, and put a 15 amp fuse the power cable in a few inches from the positive terminal of the battery.
You can test your deck and take it directly to the battery and make connections (red andllow to the positive terminal, black, negative). When you turn on the battery, but not in the place of assembly, which is a good indicator that the problem lies in the wiring between the points.
Light cable and remote control are required to operate the device.
Post a Comment